Inverter · PV Solar Inverter
Beve META-1600watt
1600 W single-phase PV inverter with a 60–450 V MPPT range.
Specifications
| Phase | Single phase in / single phase out |
|---|---|
| Frequency | 50 / 60 Hz (auto sensing) |
| IP rating | IP21 |
| Net weight | 5.1 kg |
| Rated power | 1600 W |
| Communication | RS232 / Wi-Fi |
| Start-up voltage | 90 V DC |
| MPPT voltage range | 60–450 V DC |
| Maximum PV voltage | 500 V DC |
| Output voltage range | 195.5–253 V AC |
| Operating temperature | -10°C to 50°C |
| Maximum PV input power | 1600 W |
| Nominal output current | 7 A |
| Nominal output voltage | 220 / 230 / 240 V AC |
| Maximum conversion efficiency | 97% |
How to read this record
- Continuous output is what the inverter can hold for hours. Surge is a short overload for motor starts and is often double the continuous rating.
- Battery voltage fixes the bank topology. A 48 V inverter needs a 48 V bank, and the charge current must be within the battery's limit.
- Maximum PV voltage and the MPPT window are different limits. A string can be inside the MPPT window and still exceed the maximum PV voltage when cold.
Datasheet and manual
No datasheet has been attached yet. Ask the Mishka team for the current document before specifying this model.
Check it fits your design
Specifications change with revisions and firmware. Confirm the exact model with the manufacturer, then check the battery voltage, charge current, MPPT window and communication protocol against the rest of the system.
More specifications
Record last updated 19 October 2026. Confirm the model revision with the manufacturer before ordering.
Back to the product spec database