Battery · Lithium Battery
Deye SE-F5
Deye 5.12 kWh lithium iron phosphate battery for residential solar energy storage.
Specifications
| Altitude | ≤3000m |
|---|---|
| Capacity | 100 Ah |
| Cycle Life | ≥6000 (25℃±2℃, 70% EOL) |
| Scalability | Max 32 pcs in parallel (Max. 64 pcs can parallel with CAN-Bridge) |
| Installation | Wall-Mounted, Floor-Mounted, Stack-Mounted |
| Communication | CAN2.0, RS485, Bluetooth+APP |
| Nominal Energy | 5.12 kWh |
| Nominal Voltage | 51.2 V |
| Battery Chemistry | LiFePO4 |
| Energy Throughput | 8 MWh |
| Operating Voltage | 44.8 V – 57.6 V |
| Relative Humidity | 95% (non-condensing) |
| Weight Approximate | 41 kg |
| Storage Temperature | 0 – 35℃ |
| Operating Temperature | Charge: 0 – 55℃ / Discharge: -20 – 55℃ |
| IP Rating of Enclosure | IP21 |
| Charge Current – Peak | 120 A (10 sec) |
| Discharge Current – Peak | 150 A (10 sec) |
| Recommended Depth of Discharge | 80% DoD |
| Charge Current – Max Continuous | 100 A |
| Discharge Current – Max Continuous | 120 A |
| Dimension (W × H × D) (Without hanging board) | 370 × 548 × 140 mm |
How to read this record
- Nominal energy is not usable energy. Apply the depth of discharge and efficiency before comparing runtime.
- Charge current must stay inside what the BMS and the inverter can deliver. A large bank can still be limited by a small charger.
- Confirm the BMS communication protocol (CAN or RS485) matches the inverter before specifying a lithium bank.
Datasheet and manual
No datasheet has been attached yet. Ask the Mishka team for the current document before specifying this model.
Check it fits your design
Specifications change with revisions and firmware. Confirm the exact model with the manufacturer, then check the battery voltage, charge current, MPPT window and communication protocol against the rest of the system.
More specifications
Record last updated 19 October 2026. Confirm the model revision with the manufacturer before ordering.
Back to the product spec database