Battery · Lithium Battery
Deye SE-G10.2
Deye 10.24 kWh lithium iron phosphate battery for residential solar energy storage.
Specifications
| Weight | Approx. 85 kg |
|---|---|
| Altitude | ≤2000 m |
| IP Rating | IP20 |
| Cycle Life | ≥6000 cycles (at 25℃ with 0.2C discharge and 80% DoD) |
| Dimensions | 710 mm (W) × 540 mm (D) × 133 mm (H) |
| Nominal Energy | 10.24 kWh |
| Nominal Voltage | 51.2 V |
| Nominal Capacity | 200 Ah |
| Battery Chemistry | Lithium Iron Phosphate (LiFePO4) |
| Operating Voltage | 44.8 V – 57.6 V |
| Relative Humidity | Up to 95% |
| Cell Configuration | 2P16S |
| Communication Port | CAN2.0, RS485 |
| Max. Charge Current | 100 A continuous, 200 A peak (10 sec) |
| Storage Temperature | 0℃ to 35℃ |
| Operating Temperature | Charging: 0℃ to 55℃, Discharge: -20℃ to 55℃ |
| Max. Discharge Current | 100 A continuous, 200 A peak (10 sec) |
| Recommended Depth of Discharge | 80% DoD |
How to read this record
- Nominal energy is not usable energy. Apply the depth of discharge and efficiency before comparing runtime.
- Charge current must stay inside what the BMS and the inverter can deliver. A large bank can still be limited by a small charger.
- Confirm the BMS communication protocol (CAN or RS485) matches the inverter before specifying a lithium bank.
Datasheet and manual
No datasheet has been attached yet. Ask the Mishka team for the current document before specifying this model.
Check it fits your design
Specifications change with revisions and firmware. Confirm the exact model with the manufacturer, then check the battery voltage, charge current, MPPT window and communication protocol against the rest of the system.
More specifications
Record last updated 19 October 2026. Confirm the model revision with the manufacturer before ordering.
Back to the product spec database