SPF 3000TL LVM-ES / SPF 3500–5000 ES Lite off-grid (fault codes 01–81)
Growatt 05 error code
Output is short-circuited (F05 on the ES Lite).
Likely causes
- Short in the AC output wiring
- Faulty appliance plugged into the output
- Water or damage in an output socket
- Output cable pinched or cut
Checks to run, in order
- 1Disconnect the load and restart the unit
- 2Check that the wiring is connected correctly
- 3Inspect the output circuit for damaged insulation
- 4Reconnect loads one at a time to identify the faulty circuit
Fixes
- Remove the abnormal load
- Repair the shorted output wiring
- Restart and confirm the output voltage is normal
When to escalate
If the output is clear with no load and fault 05 persists, return the unit to a Growatt repair centre.
Fix it with the right tools
Check the system around the fault before replacing parts: load, battery bank, PV string and commissioning settings. If you need a second opinion, send the code and your inverter model to our team.
Before you open the inverter
- Isolate both the AC and DC sides, then confirm the display is dead before touching terminals.
- Use insulated tools and one hand where possible. DC arcs do not self-extinguish like AC.
- If you see burnt terminals, swollen cells, leaking electrolyte or a burning smell, stop and escalate instead of resetting the fault.
Questions installers ask
What does Growatt 05 mean?
Output is short-circuited (F05 on the ES Lite).
How do I fix Growatt 05?
Remove the abnormal load Repair the shorted output wiring Restart and confirm the output voltage is normal
When should I escalate Growatt 05?
If the output is clear with no load and fault 05 persists, return the unit to a Growatt repair centre.
Can I reset Growatt 05 myself?
Only after isolating the AC and DC sides and running the checks above. If Growatt 05 returns immediately, stop resetting it and escalate; a repeating fault usually points to a real circuit, battery or hardware problem.
Which models show Growatt 05?
Growatt 05 is documented for SPF 3000TL LVM-ES / SPF 3500–5000 ES Lite off-grid (fault codes 01–81). Confirm the code on your own unit's display or manual before ordering parts.
More Growatt error codes
- Growatt 01Fan is locked (displayed as F01 on the SPF ES Lite).
- Growatt 02Internal component temperature is over 100 °C (F02 on the ES Lite).
- Growatt 03Battery is over-charged / battery voltage is too high (F03 on the ES Lite).
- Growatt 04Battery voltage low.
- Growatt 06Output voltage is too high. The manual groups 06/58 as 'output abnormal' — inverter voltage above 150 Vac or below 40 Vac.
- Growatt 07Overload time out — the inverter carried over 110% load until its overload timer expired (F07 on the ES Lite).
Guidance reviewed 17 October 2026 by the Mishka Energy installer team. Error codes vary by brand, model family and firmware; confirm against the manufacturer manual.
Back to troubleshooting